Jet holes with flow stabilisers
Jet holes with wide entrances and narrow exits funnel water backwards, cutting turbulence and side planing as you kick. Stabilisers guide the jet and delay its spread, so each kick pulls out more efficiently.
GT
A wide rubber jet fin with instant power for heavy loads and strong currents
GULL built GT for the strong torque of a true jet fin with the flex of KINUGAWA rubber. According to GULL, the semi-long, wide blade bends closer to the foot pocket than other jet fins, so it moves a lot of water with every kick while the jet holes keep it stable. The pocket takes almost any drysuit boot, and the spring strap adjusts by up to 4 cm.
฿15,990
Not chosen yet: Colour, Size · choose first, or just ask in the chat
- 1Tap Order on LINE: our chat opens with your model, colour and size typed in. Just send.
- 2We check stock and confirm the total with shipping in the chat.
- 3Pay by transfer or PromptPay, send the slip, and we ship with a tracking number.
- Free shipping in Thailand from ฿2,000
- Authorised dealer · brand warranty
- Size exchange within 7 days
Our video review
GULL GT FINS ดียังไง?
Shorts
Highlights
Semi-long, wide blade in Japanese KINUGAWA rubber
100% Japanese KINUGAWA rubber flexes to carry your kick into the blade. According to GULL, GT bends closer to the foot pocket than other jet fins and moves a lot of water each kick. The protruding centre of the tip adds power to every kick while keeping the fin easy to manage.
Drysuit-boot foot pocket
Large openings take almost any drysuit boot and make the fins easy to put on and take off. Grooves inside the pocket help your boot slide into place.
Adjustable spring strap with a finger handle
The spring moves 2 cm shorter or 2 cm longer than the standard position, up to 4 cm in all, for a better fit and steadier power. A finger handle makes it easy to put on and take off, even in thick gloves.
Who it is for
Great for
- Divers who need instant power with a heavy load, in strong currents, for quick getaways or to help a tired diver to shore, as GULL describes
- Drysuit divers and divers in GULL GS Boots
- Divers who want a rubber jet fin with both power and precise control
Maybe not for
- New divers starting out in boots: GULL does not describe GT as a beginner fin. See SUPER MEW XX, which GULL says every diver can use comfortably, or ask us on LINE
- Barefoot divers: GT is an open-heel fin made for boots; GULL MEW is made to be worn barefoot
- Travellers after a light fin: 600–635 mm long and 1,390–1,660 g per fin
Size guide
| Size | GS Boots | Other makers' dry boots (World Dive / Mobby Dick) | Weight | a × b × c × d × e (mm) |
|---|---|---|---|---|
| M | 25–26 cm | 23–25 cm | 1,390 g | 600 × 240 × 100 × 90 × 330 |
| L | 26–27 cm | 25–26 cm | 1,530 g | 620 × 240 × 102 × 95 × 330 |
| XL | 28–30 cm | 27–28 cm | 1,660 g | 635 × 240 × 116 × 99 × 330 |
GULL checked this table with Japanese suit makers; wearing boot inners changes the sizing, and fit also depends on your feet, so ask us on LINE if unsure · weights measured on black; other colours vary slightly
Not sure about the size?
- Stand on paper and measure from heel to the tip of your longest toe.
- For strap fins, go by your boot size, not your bare foot.
- Between two sizes? Ask us before you order.
Specifications
- Type
- Semi-long wide rubber jet fin
- Material
- 100% made in Japan Kinugawa rubber
- Weight
- 1,390g (M) / 1,530g (L) / 1,660g (XL)
- Length
- 600mm (M) / 620mm (L) / 635mm (XL)
- Foot pocket
- Dry Suit Compatible Foot Pocket
- Model codes
- GF-2443D (M) / GF-2442D (L) / GF-2441D (XL)
FAQ
What is GT best for?
According to GULL, GT gives instant torque when you need it most: diving with a heavy load, battling strong currents, quick getaways, and helping a struggling diver back to shore.
How do I pick a size?
Go by your boots. GULL GS Boots: M 25–26 cm · L 26–27 cm · XL 28–30 cm. World Dive / Mobby Dick dry boots: M 23–25 cm · L 25–26 cm · XL 27–28 cm. Between sizes? Ask us on LINE, and you can exchange sizes within 7 days if they are unused and have not been in the water (you cover shipping both ways unless we sent the wrong item or it is faulty).
Does it fit drysuit boots?
Yes. GT's pocket is made to take almost any drysuit boot, but boot inners change the sizing, so tell us your boot model on LINE before you order.
Can the spring strap be adjusted?
Yes. The spring moves 2 cm shorter or 2 cm longer than the standard position, up to 4 cm in all; GULL recommends a 1/4 socket driver for the job. The finger handle lets you pull it on and off easily, even in thick gloves.
Is it OK for beginners?
GULL does not describe GT as a beginner fin; it presents GT as the fin for instant torque when you need it most. If you are starting out in boots, see SUPER MEW XX, whose blade GULL made shorter so every diver can use it comfortably. Watch our review above before you decide.
How heavy are they to travel with?
Each fin weighs 1,390 g (M), 1,530 g (L) or 1,660 g (XL), measured on black, and is 600–635 mm long depending on size.
