
A 480 mm blade, the same in every size
From S to XL, every size gets the full 480 mm blade. The rounded tip holds the water right to the end of each kick. GULL calls it one of the longest rubber blades in the world.
A 480 mm rubber blade in every size, made for strong currents
GULL introduced BARRACUDA as the world's first ultra-long rubber fin, shaped after the slender barracuda. The long blade springs back on every kick and drives you forward, even through tough currents. It comes in two rubber hardnesses, Professional and Standard. GULL recommends it for expert skin and scuba divers.
฿14,900 · Professional
Not chosen yet: Version, Colour, Size · choose first, or just ask in the chat
GULL BARRACUDA FINS ฟินทรงพลังแห่งความยาว(อย่างเมื่อย?)

From S to XL, every size gets the full 480 mm blade. The rounded tip holds the water right to the end of each kick. GULL calls it one of the longest rubber blades in the world.

Raised ribs, the same height on both faces, stop the side-slip and twist that long blades often suffer. The blade holds the water on the down kick and the up kick.

The opening hugs your Achilles tendon and holds your foot like a sports shoe. Less looseness, more efficient kicks.

Tread in the centre, on the ribs and around the sides gives you footing on wet boat decks and rocky shore entries.
GULL's top-grade KINUGAWA Super-X rubber for the quickest rebound on both the down and up kick. Instant power and speed when you have to work against a strong current.
Model codes GF-2375D / 2373D / 2372D / 2371D
The same Super-X rubber as Professional in a softer formula. Kicks feel lighter and easier, and the long blade stays smooth and versatile to handle.
Model codes GF-2395D / 2393D / 2392D / 2391D
| Size | Boots (Mew / Short Mew) | Weight (per fin) | a × b × c × d (mm) |
|---|---|---|---|
| S | 23 cm | 1,260 g | 745 × 210 × 85 × 480 |
| M | 24 cm | 1,280 g | 765 × 210 × 87 × 480 |
| L | 26 cm | 1,385 g | 780 × 210 × 95 × 480 |
| XL | 27 cm | 1,410 g | 795 × 210 × 95 × 480 |
Sizes assume GULL 3 mm Mew Boots or Short Mew Boots · weight is per fin, measured on black; other colours vary slightly

Both use KINUGAWA Super-X rubber, the same 480 mm blade and the same size chart. The difference is hardness. Professional is hard, for a quicker, stronger rebound in strong currents. Standard is soft, for lighter, easier kicks and easier handling. Still unsure? Ask us on LINE.
GULL sizes by the length of GULL 3 mm Mew Boots or Short Mew Boots: S 23 cm · M 24 cm · L 26 cm · XL 27 cm. Between sizes? Ask us on LINE, and you can exchange sizes within 7 days if they are unused and have not been in the water (you cover shipping both ways unless we sent the wrong item or it is faulty).
GULL recommends BARRACUDA for expert divers. If you are just starting, GULL MEW is the fin GULL calls easy to use at any level. If you already kick well and want to move up to BARRACUDA, choose the softer Standard, and watch our review above first.
No. GULL gives every size the same 480 mm blade. The foot pocket and overall length change with size, from 745 mm (S) to 795 mm (XL).
Each fin weighs 1,260 g (S) to 1,410 g (XL), measured on black, and is 745–795 mm long. A carrying case comes in the box.
One pair of fins and a carrying case.